When you buy through links on our site, we may earn an affiliate commission.

31 Best Jeep yj rear bumper with tire carrier in 2021: After Researching 30 Options

Are you looking for expert advice on buying the best jeep yj rear bumper with tire carrier? In that case, you’ve arrived at the right place, because in my list, I’ve added 31 reliable options that you shall consider getting this year (2021).

The best jeep yj rear bumper with tire carrier varies for different people. For instance, If money isn’t an issue, you might prefer the one that has features suited for diversified use-cases. However, not everyone has the budget for the costliest or feature-rich option, that’s why I’ve also included the value-for-money and cheap options.

In some cases, the budget (value-for-money) and cheap options shall come with great features too but it might be from an unknown brand. In other cases, the budget or less value options might miss a few features from the best options. However, you should make sure that the product you’re getting meets your requirements.

The 31 Best jeep yj rear bumper with tire carrier in 2021

Wait for a while and list down all the features you’re looking for in a jeep yj rear bumper with tire carrier. Once you are aware of your needs, continue looking at the list below. Also, make sure to buy the one that fulfills your requirements. Because, is there any point in spending money on something that won’t do the task you bought it for? No, right?

Times Arcade Rating

7.8

Customer Satisfaction

7.4

Feature Score

7

Expert Rating

7.2

Easy to install

9

Value for money

8

Sturdiness

8

Durability

6

Features

  • D-ring mounts welded both inside and out for increased strength. D-rings included-4.75 ton capacity each. Black isolators and washers included. 2" receiver hitch is incorporated into the rear bumper.
  • Made of 5/32" cold rolled steel sheet. Textured black powder coat for corrosion protection and durability.
  • Drilling maybe required for a clean straight forward installation.
  • NOTE: The tire carrier parts are packed in the bumper package. Clear installation instruction is included. YOU NEED TO ASSEMBLE THE TIRE CARRIER BY YOURSELF.
  • Solid billet aluminum handle with built-in cam lock is used for rear tire carrier release. Adjustable tire mount for rear tire carrier is included.

Times Arcade Rating

9

Customer Satisfaction

8.6

Feature Score

8.2

Expert Rating

8.4

Value for money

9.4

Easy to install

8.6

Features

  • INSTALLATION - No cutting and no drilling required. Assured high quality and dependability. Some application may require the license plate to be relocated as the tire carrier swing arm may contact the license plate bracket. The integrated receiver hitch is for recreational use and is not rated for towing.
  • D-RING SHACKLES AND HITCH RECEIVER - The solid D-ring mounts are welded on both inside and outside. Two 4.75 ton D-Ring shackles and black isolators are included. The D-Ring mounts are welded both inside and outside for extra strength. Built-in classIII 2" hitch receiver with safty chain loop.
  • ALUMINUM HANDLE - Solid billet aluminum handle with built-in cam lock is used for rear tire carrier release. Adjustable tire mount for rear tire carrier is included.
  • FITMENT - Fit for 1987-2006 Wrangler TJ YJ.
  • HEAVY DUTY CONSTRUCTION - Manufactured from durable 5/32" steel sheet. This off-road rock crawler rear bumper is completed in a two stage finish using epoxy pre-coating and high-grade textured black powder coating for long lasting durability.

Manufacturer: ‎EAG

Brand: ‎EAG

Item Weight: ‎119.5 pounds

Product Dimensions: ‎62.32 x 10.43 x 32.13 inches

Is Discontinued By Manufacturer: ‎No

Exterior: ‎Textured

Manufacturer Part Number: ‎JTJRB003+JTJRB010

Position: ‎Rear

Times Arcade Rating

9

Customer Satisfaction

8.6

Feature Score

8.2

Expert Rating

8.4

Easy to install

9.2

Sturdiness

9.2

Value for money

8.8

Features

  • HITCH RECEIVER - 2" standard receiver hitch included in the rear bumper.
  • FITMENT - Fits for 1987-2006 Wrangler TJ YJ.
  • INSTALLATION - Easy bolt-on installation.
  • RUGGED CONSTRUCTION - Manufactured from durable 5/32" steel sheet. High quality textured powder coat for corrosion protection and durability.
  • D-RING SHACKLES - One piece welded design for ultimate strength. The D-ring mounts are welded on both inside and outside for extra strength. Two 4.75 ton capacity D-ring shackles and black isolators are included.

Manufacturer: ‎EAG

Brand: ‎EAG

Model: ‎Rear Bumper

Item Weight: ‎57.4 pounds

Product Dimensions: ‎67.32 x 11.42 x 9.06 inches

Item model number: ‎JTJRB002

Is Discontinued By Manufacturer: ‎No

Exterior: ‎Textured

Manufacturer Part Number: ‎51-0008

Position: ‎Rear

Times Arcade Rating

9

Customer Satisfaction

8.6

Feature Score

8.2

Expert Rating

8.4

Easy to install

9.2

Sturdiness

9.2

Value for money

8.8

Features

  • HITCH RECEIVER - 2" standard receiver hitch included in the rear bumper.
  • FITMENT - Fits for 1987-2006 Wrangler TJ YJ.
  • INSTALLATION - Easy bolt-on installation.
  • RUGGED CONSTRUCTION - Manufactured from durable 5/32" steel sheet. High quality textured powder coat for corrosion protection and durability.
  • D-RING SHACKLES - One piece welded design for ultimate strength. The D-ring mounts are welded on both inside and outside for extra strength. Two 4.75 ton capacity D-ring shackles and black isolators are included.

Manufacturer: ‎EAG

Brand: ‎EAG

Model: ‎Rear Bumper

Item Weight: ‎57.4 pounds

Product Dimensions: ‎67.32 x 11.42 x 9.06 inches

Item model number: ‎JTJRB002

Is Discontinued By Manufacturer: ‎No

Exterior: ‎Textured

Manufacturer Part Number: ‎51-0008

Position: ‎Rear

Times Arcade Rating

7.8

Customer Satisfaction

7.4

Feature Score

7.2

Expert Rating

7.4

Easy to install

8.8

Value for money

8.4

Durability

7.8

Sheerness

6.4

Features

  • PERFECT FOR OFF-ROAD USE - Featuring a 2" standard hitch receiver, two high strength 4.75T D-Ring mounts and a spare tire carrier. The EAG off-road rear bumper with tire carrier is perfect for off-road use.
  • HEAVY-DUTY CONSTRUCTION - Manufactured from 5/32" mild steel plating. This rear bumper is completed in high-grade textured black powder coating for long-lasting durability.
  • EASY-OPEN TIRE CARRIER - The heavy-duty tire carrier is also built to last and due to high-quality bearings at the shaft, it opens and closes smoothly. A custom-designed billet aluminum handle securely locks the tire carrier in place so there is no worry of it coming loose on the trail.
  • NOTE: The tire carrier parts are packed in the bumper package. Clear installation instruction is included. YOU NEED TO ASSEMBLE THE TIRE CARRIER BY YOURSELF.
  • PERFECT FOR OVER-SIZED TIRES - The EAG rear bumper with tire carrier for Wrangler JK features heavy-duty construction, this tire carrier can securely carry the beefiest of spare tires. With its adjustable mounting positions, this tire carrier can accommodate oversized tires up to 40 inches.

Manufacturer: ‎EAG

Brand: ‎EAG

Item Weight: ‎144 pounds

Product Dimensions: ‎66.14 x 16.93 x 14.17 inches

Exterior: ‎Textured

Manufacturer Part Number: ‎JJKRB021

Position: ‎Rear

Times Arcade Rating

8.6

Customer Satisfaction

8.2

Feature Score

7.8

Expert Rating

8

Features

  • Compatibility- Fit for 07-18 Wrangler JK.
  • Sturdy Construction - Manufactured from durable 1/8 inch steel sheet and finished in a durable black textured powder coat.
  • Relocation Bracket - Allow you to mount license plate safely within JK spare tire away from trail hazards that could otherwise damage it.
  • Note - No drilling required with the EAG JK Wrangler tire carrier. And MINOR DRILLING REQUIRED for other aftermarket tire carriers.
  • License Plate Installation - Directly bolt-on installation.

Manufacturer: ‎EAG

Brand: ‎EAG

Item Weight: ‎2.2 pounds

Product Dimensions: ‎9.45 x 5.91 x 5.91 inches

Is Discontinued By Manufacturer: ‎No

Exterior: ‎Black

Manufacturer Part Number: ‎JJKML022

Position: ‎Rear

Times Arcade Rating

9.4

Customer Satisfaction

9

Feature Score

8.6

Expert Rating

8.8

Features

  • FITMENT - 2007-2018 Wrangler JK.
  • REAR BUMPER - The JK rear bumper is equipped with a 2" standard hitch receiver, two high strength D-Ring mounts with 9,500 lb. rated D-Rings.
  • EASY INSTALLATION - Direct bolt-on. All necessary hardware and installation instructions are included.
  • OFF-ROAD FRONT BUMPER - The EAG rock crawler front bumper is equipped with 9,500 lb. rated D-Rings on beefy mounts, OE fog light housings and an aggressive tube over rider with additional light accommodations. The JK Wrangler front bumper features a built-in winch plate that is capable of supporting a 12,000 lb. winch.
  • HEAVY DUTY CONSTRUCTION - EAG manufactures their Wrangler JK unlimited front bumper to exact tolerances from 5/32" thick mild steel sheet and 2" x 0.120" steel tubing for superior strength and durability. High quality textured powder coat for corrosion protection.

Manufacturer: ‎EAG

Brand: ‎EAG

Item Weight: ‎48.9 pounds

Is Discontinued By Manufacturer: ‎No

Exterior: ‎Textured

Manufacturer Part Number: ‎JJKRB000+JJKFB001

Position: ‎Front

Times Arcade Rating

9.4

Customer Satisfaction

8.8

Feature Score

8.4

Expert Rating

8.6

Value for money

9.4

Easy to install

9.2

Features

  • HITCH RECEIVER - Class Ⅲ 2" receiver hitch rated 5,000 lbs equipped with safety chain loops.
  • EASY INSTALLATION - Direct bolt-on.All necessary hardware and installation instructions are included.
  • FITMENT - Fit for 2007-2018 Wrangler JK 2Door and 4Door all models.
  • CONSTRUCTION - Manufactured from 5/32" steel sheet. Textured black powder coat finish for corrosion protection and durability.
  • D-RING SHACKLES - Two 4.75 ton capacity D-ring shackles are included.The D-ring mounts are welded on both inside and outside for extra strength.

Manufacturer: ‎E-Autogrilles

Brand: ‎EAG

Model: ‎Rear Bumper

Item Weight: ‎88 pounds

Product Dimensions: ‎64.33 x 13.23 x 11.06 inches

Item model number: ‎JJKRB000

Is Discontinued By Manufacturer: ‎No

Exterior: ‎Machined

Manufacturer Part Number: ‎51-0310

Position: ‎Rear

Times Arcade Rating

8.8

Customer Satisfaction

8.4

Feature Score

8

Expert Rating

8.2

Features

  • NOTE: The tire carrier parts are packed in the bumper package. Clear installation instruction is included. YOU NEED TO ASSEMBLE THE TIRE CARRIER BY YOURSELF.
  • Solid billet aluminum handle with built-in cam lock design keeps tire carrier secure while off-roading.
  • High strength D-ring mounts welded both inside and out with two 4.75 ton D-rings included. 2" receiver hitch incorporated into the bumper.
  • Two-way adjustable tire mount for tire carrier. 3 point tire mounting system supports oversized tires.
  • Manufactured from 5/32" thick plate steel sheet. New design with a wheel bearing pivot system. Textured black powder coat for corrosion protection and durability.

Times Arcade Rating

9.2

Customer Satisfaction

8.6

Feature Score

8.4

Expert Rating

8.4

Sturdiness

9.6

Easy to install

9

Value for money

8.8

Features

  • No cutting and no drilling required. Assured high quality and dependability.
  • Tire carrier will only fit up to a 35" tire. Solid billet aluminum handle with built-in cam lock design keeps tire carrier secure while off-roading.
  • NOTE: The tire carrier parts are packed in the bumper package. Clear installation instruction is included. YOU NEED TO ASSEMBLE THE TIRE CARRIER BY YOURSELF.
  • 2" receiver hitch incorporated into the bumper.
  • Manufactured from 5/32" cold rolled steel sheet and 2"X .120 steel tubing. Textured black powder coat for corrosion protection and durability.

Times Arcade Rating

8.2

Customer Satisfaction

7.8

Feature Score

7.4

Expert Rating

7.6

Value for money

8.8

Sturdiness

8

Easy to install

7.6

Features

  • Integrated 2" Standard Receiver Hitch, High Strength D-Ring Mounts and 9,500 lb. Rated D-Rings Included, 2x 18W High Powered LED Floodlights Included
  • Special: New Type Upgrade Lock w/ a Double Latch System for a Secure Hold
  • Bolt-On Installation, No Drilling Required. Compatible with Jeep Wrangler TJ & YJ 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006
  • Heavy Duty, High Strength Steel Construction, Textured Black Powder Coat Finished, E-coat systems can deliver a wide range of lacquer and paint finishes with a combination of state-of-the art performance and decorative effects.The bumpers can last for 100 hours during the salt spray test which is equivalently to have a 5-year corrosion capacity. The product percent of pass reaches 100% after the salt spray test
  • Rear Bumper w/ Swing Out Tire Carrier, Can Accommodate Up to 35" Tire, Bumper and Swing Arm Weight: 136.6 lbs

Times Arcade Rating

6.4

Customer Satisfaction

6

Feature Score

5.8

Expert Rating

6

Sturdiness

7.2

Value for money

7

Easy to install

5

Features

  • Feature&material: The item is 100% Brand New. The surface is black with well powder coated. The material is heavy duty steel,with superior efficiency and durability. Placement on vehicle: Rear.
  • BUY WITH CONFIDENCE. 100% SATISFACTION GUARANTEE:We sure you will love our high quality products. However,if you are unsatisfied in either way,you have No-Questions-Asked, 30-DAY Money-Back Guarantee.
  • High performance & Easy installation & Economical!
  • Fits:This rear bumper perfectly fits 1987-1996 Jeep Wrangler YJ& 1997-2006 Jeep Wrangler TJ. Manufactured from 3/16" mild steel plating.With 2" hitch receiver & 2 D-rings&tire carrier,textured off road style.
  • You will receive two packages. Package Include:1x Rear Bumper, 2 x D-rings,1 x Tire Carrier,1 Set of Hardware.

Manufacturer: ‎KUAFU

Brand: ‎KUAFU

Item model number: ‎BL541

Exterior: ‎Chrome

Manufacturer Part Number: ‎BL541

Position: ‎Rear

Times Arcade Rating

8.8

Customer Satisfaction

8.4

Feature Score

8

Expert Rating

8.2

Value for money

9

Easy to install

8.8

Sturdiness

8.6

Features

  • D-RING SHACKLES AND HITCH RECEIVER - The solid D-ring mounts are welded on both inside and outside. Two 4.75 ton D-Ring shackles and black isolators are included.Built-in classIII 2" hitch receiver with safty chain loop.
  • SWING OUT TIRE CARRIER - Two-way adjustable tire mount for rear tire carrier can accommodate oversized tires.
  • FITMENT - Fit for 1987-2006 Wrangler YJ TJ.
  • CONSTRUCTION - Manufactured from durable 5/32" steel sheet. Durable textured black powder coat finish.
  • EZ Grip LATCH HANDLE - The EAG patent pending EZ Grip latch handle engineered to be user friendly. The latch easily opens and closes with the ease of a car door. The latch is secure, cannot accidently pop open.

Features

  • EASY INSTALLATION - Front bumpers are designed to be directly bolt-on install; Rear bumper drilling maybe required for a clean straight forward installation.
  • MATERIAL - One piece welded design for ultimate strength. Manufactured from 5/32" cold rolled steel sheet and 2"x .120 steel tubing. Textured black powder coat for corrosion protection and durability.
  • FITMENT- EAG Front Bumper + Rear Bumper with Tire Carrier Set for 1987-2006 Wrangler TJ YJ
  • REAR BUMPER - Solid billet aluminum handle with built-in cam lock is used for rear tire carrier release. Adjustable tire mount for rear tire carrier is included. 2" receiver hitch & 2 shackles & adjustable tire mount included.
  • FRONT BUMPER - D-ring mounts are welded both inside and out for increased strength. D-rings are included-4.75 ton capacity each. Built-in winch plate for up to 12,000 lbs. winch. Two tabs on pre-runner hoop for extra off-road lights

Times Arcade Rating

6.8

Customer Satisfaction

6.4

Feature Score

6.2

Expert Rating

6.4

Easy to install

8

Sturdiness

7.2

Value for money

5.2

Features

  • FIVE YEAR WARRANTY: Our Rugged Ridge products are covered by industry leading 5 year warranty & Rugged Ridge Floor Liners have Limited Lifetime Warranties providing customers with repair or replacements subject to certain common exclusions.
  • HEAVY DUTY TIRE MOUNT: The black powder coated steel wheel mount kit provides the ultimate in strength & adjustability for mounting your oversized wheel & tire. Allowing you to mount up to 35" wheel & tire combos without any concerns.
  • FOR THE SPARE: The XHD Bumper Tire Carrier maintains full mobility of the rear tailgate and eliminates the cumbersome two-stage opening process.
  • OFFROAD ACCESSORIES: Get serious about off-roading with a variety of tow hooks, hitches & kits that give yourself a way out in sticky situations. We offer winches, recovery gear, tube doors, mirror kits & more accessories.
  • RUGGED RIDGE JEEP PARTS: Count on Rugged Ridge to provide you with proven Jeep parts & accessories like bumpers, lift kits, wheels, interior accessories, floor liners & more for varying Jeep models

Manufacturer: ‎Rugged Ridge

Brand: ‎Rugged Ridge

Item Weight: ‎80.9 pounds

Product Dimensions: ‎48 x 32 x 8 inches

Item model number: ‎11546.42

Is Discontinued By Manufacturer: ‎No

Exterior: ‎Black, Textured

Manufacturer Part Number: ‎11546.42

OEM Part Number: ‎11546.42

Position: ‎Rear

Times Arcade Rating

9.4

Customer Satisfaction

9

Feature Score

8.6

Expert Rating

8.8

Features

  • Fit 1987-2006 Wrangler TJ/YJ modunlimited models (including: Freedom, Sports, Rubicon, Shahara).
  • Easy to install without drilling or cutting. Follow the instructions to install!
  • Two 4.75-ton high-strength D-ring mounts are welded to the rear bumper to provide 2x4.75T D-rings. The maximum tension can support 12,000 pounds. It has a sturdy aluminum alloy handle with a convex cam lock for releasing the rear tire frame. Includes adjustable tire mount for rear tire installation. There are also two 5 liter oil drum hook devices.
  • Built-in led lamp design: beautiful and elegant. Rear bumper with spare tire frame, with 2x20W LED aluminum light + 2x18W LED aluminum light. LED aluminum lights can not only produce visual beauty, but also provide you with lighting and safety on dark roads.
  • Rear bumper material: 5/32 inch thick low carbon hard steel and 2 inch x 0.120 inch precision tolerance steel tube, with stronger bumper, black powder coating, corrosion resistance and durability.

Times Arcade Rating

6.2

Customer Satisfaction

6

Feature Score

5.6

Expert Rating

5.8

Value for money

6.4

Easy to install

6

Features

  • Two-Stage Textured Matte Black Finish;Bolt-on Skid Plate
  • Weight: 167 lbs; Can Accommodate Up to a 37" Tire;Can be installed double oil drums; For Jeep JK 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018
  • 2 Year Manufacturer Warranty and Lifetime Customer Service
  • Welds on the inside and out!18w LED accent lighting
  • Manufactured from cold rolled steel;Marine Grade Stainless Steel Hardware

Manufacturer: ‎u-Box

Brand: ‎U-Box

Item Weight: ‎167 pounds

Package Dimensions: ‎64.49 x 16.97 x 12.99 inches

Is Discontinued By Manufacturer: ‎No

Exterior: ‎Textured

Manufacturer Part Number: ‎SHB2015AB-N

Position: ‎Rear

Times Arcade Rating

8

Customer Satisfaction

7.6

Feature Score

7.2

Expert Rating

7.4

Features

  • Manufactured from cold rolled steel; E-coat systems can deliver a wide range of lacquer and paint finishes with a combination of state-of-the art performance and decorative effects.The bumpers can last for 100 hours during the salt spray test which is equivalently to have a 5-year corrosion capacity. The product percent of pass reaches 100% after the salt spray test
  • Weight: 167 lbs; Can Accommodate Up to a 35" Tire;Can be installed double oil drums
  • 2 Year Hooke Road Manufacturer's Warranty & Life time customer support
  • Compatible with Jeep Wrangler JK & Unlimited 2007-2018
  • Two-Stage Textured Matte Black Finish; Bolt-on Skid Plate; Welds on the inside and out!18w LED accent lighting

Times Arcade Rating

8.4

Customer Satisfaction

8

Feature Score

7.6

Expert Rating

7.8

Sturdiness

8.8

Value for money

8.8

Easy to install

7.4

Features

  • One-piece design is robotically welded for extreme durability
  • Assured high quality and dependability
  • Tested under extreme conditions
  • Sport the signature look with pre-cut vertical uprights
  • Stainless steel design is polished to a mirror finish

Manufacturer: ‎Smittybilt

Brand: ‎Smittybilt

Item Weight: ‎123 pounds

Product Dimensions: ‎55.3 x 7.2 x 6.5 inches

Item model number: ‎76651D

Is Discontinued By Manufacturer: ‎No

Exterior: ‎Stainless Steel

Manufacturer Part Number: ‎76651D

OEM Part Number: ‎DSBP76651D

Position: ‎Rear

20. Smittybilt 76896-01 XRC Atlas Rear Bumper with Hitch

Smittybilt 76896-01 XRC Atlas Rear Bumper with Hitch Brand Brand: Smittybilt
Smittybilt 76896-01 XRC Atlas Rear Bumper with Hitch Weight ‎111 pounds
Smittybilt 76896-01 XRC Atlas Rear Bumper with Hitch Size ‎74 x 20 x 11 inches
Smittybilt 76896-01 XRC Atlas Rear Bumper with Hitch
Smittybilt 76896-01 XRC Atlas Rear Bumper with Hitch Smittybilt 76896-01 XRC Atlas Rear Bumper with Hitch Smittybilt 76896-01 XRC Atlas Rear Bumper with Hitch Smittybilt 76896-01 XRC Atlas Rear Bumper with Hitch Smittybilt 76896-01 XRC Atlas Rear Bumper with Hitch

Times Arcade Rating

5.6

Customer Satisfaction

5.2

Feature Score

5

Expert Rating

5.2

Value for money

5.6

Easy to install

5.4

Features

  • These Are Complete Line Of Heavy-Duty Shop Products
  • These Products On Exceptionally High Order Fulfillment Rates, Breadth Of Available Products
  • Through Creativity, Productivity And Innovation - This Brand Continues To Develop The Finest Automotive Accessories

Manufacturer: ‎Smittybilt

Brand: ‎Smittybilt

Item Weight: ‎111 pounds

Product Dimensions: ‎74 x 20 x 11 inches

Item model number: ‎76896-01

Is Discontinued By Manufacturer: ‎No

Exterior: ‎Chrome

Manufacturer Part Number: ‎76896-01

OEM Part Number: ‎76896-01

Position: ‎Rear

Times Arcade Rating

8.6

Customer Satisfaction

8.2

Feature Score

7.8

Expert Rating

8

Features

  • Tested under extreme conditions
  • One-piece design is robotically welded for extreme durability
  • Sport the signature look with pre-cut vertical uprights
  • Stainless steel design is polished to a mirror finish
  • Assured high quality and dependability

Times Arcade Rating

9.2

Customer Satisfaction

8.8

Feature Score

8.4

Expert Rating

8.6

Features

  • Class III 2 inch receiver hitch included
  • Manufactured out of 3/16 inch thick cold rolled solid plate
  • Optional swing away tire carrier can be added at any time
  • Solid D-ring mounts welded inside and out
  • E-coat undercoated, dual stage textured black matte powder coat

Times Arcade Rating

10

Customer Satisfaction

9.6

Feature Score

9

Expert Rating

9.4

Features

  • HITCH RECEIVER - 2" standard receiver hitch included in the rear bumper.
  • D-RING SHACKLES - One piece welded design for ultimate strength. The D-ring mounts are welded on both inside and outside for extra strength. Two 4.75 ton capacity D-ring shackles and black isolators are included.
  • INSTALLATION - Professional installation recommended. No cutting and no drilling required.
  • FITMENT - Fits for 1987-2006 Wrangler TJ YJ.
  • RUGGED CONSTRUCTION - Manufactured from durable 5/32" steel sheet. High quality textured powder coat for corrosion protection and durability.

Manufacturer: ‎EAG

Brand: ‎EAG

Item Weight: ‎102 pounds

Exterior: ‎Textured

Manufacturer Part Number: ‎JTJFB000+JTJRB002

Position: ‎Rear

Times Arcade Rating

9

Customer Satisfaction

8.6

Feature Score

8.2

Expert Rating

8.4

Features

  • EASY TO INSTALL - Easy bolt-on installation. No drilling or cutting required. All mounting hardware and Installation instruction included.
  • NO-HASSLE WARRANTY - High quality standard. TAC 3-year limited manufactures warranty.
  • OUTSTANDING DESIGN - High strength D-ring mounts with 4.75T are welded both inside and outside. Smartly designed to be a direct bolt-on solution for trail headed Jeeps. Standard width bumper offers maximum protection and swing out tire carrier included. 2" standard hitch receiver included.
  • FITS PERFECTLY - Fit 2007-2018 Wrangler JK (Exclude 2018 Wrangler JL Models) (Please contact us to confirm fitment before ordering.)
  • SURFACE FINISH - Heavy duty 3/16" steel plate and 0.120" tubing for superior strength and rigidity. Premium two stage textured black powder coat finish.

Times Arcade Rating

5.2

Customer Satisfaction

5

Feature Score

4.8

Expert Rating

4.8

Easy to install

6.4

Value for money

5.6

Sturdiness

4.8

Sheerness

4

Features

  • HEAVY DUTY: ECOTRIC Jeep Wrangler JK Rear Bumper & Tire Carrier Kit. Bumper integrates high-powered 18W LED Work lights for increased visibility. Durable textured black powder coat finish for corrosion protection and durability.
  • PAKAGE INCLUDED: Heavy duty 1/8" Steel Construction Bumper; 2x18W High Powered LED Floodlights; 2" Standard Hitch Receiver; Rear Bumper w/Lockable Tire Carrier; 9,500lb Rated D-Rings; **Hardware shown in the picture is Included.**
  • BEST SERVICE: If your items encounter any adaptation and Packing problem or anything-else problems, please give us the opportunity to replace the item/part. We provide technical support at any time, please feel free to tell us what we can do for you, we will reply in 24 hours.
  • INSTALLATION: ** Instruction is not Included.** No cutting and no drilling required. Professional installation is recommended.
  • FITMENT: Compatible with Jeep Wrangler JK & Unlimited 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018

Features

  • Package Include:1 X Rear Bumper w/Tire Carrier,Mounting Hardware as Shown
  • Application:1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 for Chevrolet Wrangler TJ YJ
  • Corrosion Resistance Finish:This bumper is finished with a e-coat and a powder coat, it will never get rusted even the coat off.
  • Durable Materials:This Rear bumper w/Tire Carrier are made of durable 5/32" steel sheets and 2"X0.120" steel tubing. High quality to keep the body of your car protected from impacts in the harsh off-road environment.
  • Easy Installation:Direct bolt-on aftermarket bumper using just basic hand tools, no drilling or cutting required for a clean straight forward installation.

Features

  • [Heavy Duty Construction] The Rear bumper w/Tire Carrier are manufactured from durable 5/32" steel sheet and 2"X0.120" steel tubing.Include two 4.75 Ton D-Rings,It not only makes your precious car look tougher but it also give your car Protection.
  • [Perfect Fitment] 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 for Chevrolet Wrangler TJ YJ
  • [High Strength D-Ring Mounts] the D-Ring mounts are welded both inside and outside for extra strength,Perfect for Off-Road Protection.
  • [Easy Installation] Designed to be a direct bolt-on aftermarket bumper using just basic hand tools, so there is no drilling or cutting required for installation.
  • [Tire Carrier] Adjustable spare tire rack for up to 37" tire. Extra Rubber stops reduces noise during operation.

Manufacturer: ‎ECCPP

Brand: ‎ECCPP

Model: ‎Rear bumper w/Tire Carrier

Item Weight: ‎99 pounds

Product Dimensions: ‎44.86 x 23.62 x 8.66 inches

Item model number: ‎Adjustable

Exterior: ‎Powder Coat, Black

Manufacturer Part Number: ‎833359-5211-1516460102

Position: ‎Rear

Times Arcade Rating

9.2

Customer Satisfaction

8.6

Feature Score

8.4

Expert Rating

8.4

Sturdiness

9.6

Value for money

9.6

Easy to install

8.2

Features

  • TYGER no-hassle 5 year warranty against manufacturing defects!
  • Comes with welded D-Ring mounts and light housings. Fits up to 3" side light pods.
  • Vehicle-specific design for a custom fit on : 1987-2006 Jeep Wrangler TJ/YJ
  • Made of heavy duty 5mm carbon steel with powder coated black textured finish for extreme protection and rust resistant.
  • Easy Bolt-On installation. No drilling required. (DIY instruction included in the package.)

Features

  • Package list:1 X Rear Bumper w/Tire Carrier,Mounting Hardware as Shown
  • Reliable Material:Rear Bumper w/Tire Carrier are made of 5/32 inch thick low carbon hard steel and 2 inch x 0.120 inch precision tolerance steel pipe, coated with a black powder coating on the bumper surface to achieve strong corrosion resistance.
  • Easy Installation:Direct installation with no cutting or drilling required for this Back Bumper w/Tire Carrier
  • Fit for:1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 for Chevrolet Wrangler TJ YJ
  • D-ring Design:Rear bumper has two 4.75-ton high-strength D-ring mounts welded into the bumper and gives your vehicle an attractive upgrade.It also has a solid aluminum alloy handle with a convex cam lock for releasing the rear tire ffor Rame. Includes adjustable tire mount for rear tire mount.

Features

  • Fitment: Please check Amazon Fitment Filter and Description to see if this item will work on your vehicle before purchase!
  • Specification: Model:CA-109; 3 point tire mounting system supports oversized tires.; 2" receiver hitch incorporated into the bumper.; Solid billet aluminum handle with built-in cam lock design keeps tire carrier secure while off-roading.; One piece welded design for ultimate strength.Dual stage textured black powder coat finish.; For 87-06 Rear Bumper W/ LED Light, you can look at
  • Rear Bumper W/ Tire Carrier D-ring Hitch Receiver For
  • Packing list: 1x Rear Bumper with Tire Carrier.; Set of Hardware(Include D-Rings as the picture showed).; Two packages (If you receive one package first, please wait for another one, it will come to you soon)
  • Part#: FLASH000486

Manufacturer: ‎LYNHJC

Brand: ‎LYNHJC

Exterior: ‎Painted

Manufacturer Part Number: ‎A86100-000486

OEM Part Number: ‎163

Position: ‎Rear

Times Arcade Rating

9.4

Customer Satisfaction

9

Feature Score

8.6

Expert Rating

8.8

Features

  • Manufactured from durable 5/32" steel and 2"x.120" tubing
  • D-Ring mounts welded inside and out for increased strength
  • Built in winch plate will mount up to 12000 lbs. winch
  • Comes in satin black finish
  • D-Rings included - 4.75 ton capacity

Manufacturer: ‎Paramount Restyling

Brand: ‎Paramount Automotive

Model: ‎Jeep Accessory

Item Weight: ‎81.1 pounds

Product Dimensions: ‎60 x 13 x 10 inches

Country of Origin: ‎China

Item model number: ‎51-0014

Exterior: ‎Textured powder coat finish Black

Manufacturer Part Number: ‎51-0014

Position: ‎Rear

Jeep yj rear bumper with tire carrier - The Buyer’s Guide

Although the above section might’ve helped you find the right jeep yj rear bumper with tire carrier for your needs, if you’re still confused, continue reading this. We’ve discussed various factors that you should consider when getting one.

1. Your Requirements vs the Features

Make sure that the jeep yj rear bumper with tire carrier you are getting has all the features you are looking for. Because, I believe that there’s no point in buying it, if it can’t do the main task you’re buying it for?

  • The Most Feature Rich: EAG Classic Rear Bumper with Tire Carrier Black Textured Fit for 87-06 Jeep Wrangler TJ YJ
  • Average Features (But High Value for Money): EAG Rear Bumper with Tire Carrier Fit for 07-18 Wrangler JK
  • Cheap Yet Feature Rich: EAG Classic Rear Bumper with Tire Carrier Black Textured Fit for 87-06 Jeep Wrangler TJ YJ

2. Pricing vs Budget

Wouldn’t everyone buy the most expensive or the best jeep yj rear bumper with tire carrier if it wasn’t for the budget? Although the best option has a lot of extra features, I personally believe that you should not overspend on the product for the features you won’t use.

However, a lot of us have limited budgets and in some cases you might end up sacrificing an important feature. In such a case, don’t sacrifice. Because if it can’t perform/do the main task for which you are buying it, is there any point in getting that?

3. Brand

Although, branded jeep yj rear bumper with tire carrier costs a little more than the unbranded options. But I advise my readers (including you), to consider getting the one from a reputed brand. Not only do they offer great customer service, high-quality build, and global support, but they're also easy to re-sell and fetch a better price despite being old.

4. Check out the Best Lists

One of the best ways to find good quality jeep yj rear bumper with tire carrier is by browsing or checking out the best lists like this. The writers/researchers do huge research and make sure that you get the best-quality product with features suited for diversified tasks. Although, in some cases, the lists won’t be great, in that case, just check out other lists.

5. Look for Deals

You can either use the deal finder on our website or look for popular deal websites. In some cases, you can save upto 5-15%. However, in this case, I’ve already listed out the options with links to the best available deals. Also, make sure that you’re getting from an authorized seller (there’s a huge increase in online fraud).

6. User Reviews

One of the best things about buying a jeep yj rear bumper with tire carrier online is, there are a plethora of eCommerce platforms that have “customer reviews” where a person who has bought the product reviews it and shares his/her experience with it. You can also check for a specific feature in those sections and you’ll surely find a lot of answers.

7. Individual Product Reviews

Individual product reviews are written by bloggers, independent reviewers, researchers, media publications, etc where they review and test the product for weeks and publish an in-depth review about that single product. You can just make a Google search and you’ll find endless individual jeep yj rear bumper with tire carrier reviews.

The Best Brands That Make jeep yj rear bumper with tire carrier

Like mentioned above, buying a branded jeep yj rear bumper with tire carrier can save you from troubles in the future with high-quality customer support and could also fetch a better resale value. According to me, here are the best-rated brands you should consider:

  • EAG
  • Hooke Road
  • KUAFU
  • Tidal Automotive
  • Brand: Rugged Ridge
  • Vijay
  • u-Box
  • Brand: Smittybilt
  • TAC TRUCK ACCESSORIES COMPANY
  • ECOTRIC
  • Brand: TUPARTS
  • ECCPP
  • Tyger Auto
  • LSAILON
  • Brand: LYNHJC
  • Paramount Automotive
The Verdict

I’ve spent 30 researching the jeep yj rear bumper with tire carrier. I’ll be honest, I haven’t tested all the products I’ve listed, but I’ve done hours of research, went across verified customer reviews, and various forum posts to come up with this list.

I’ve also added a brief buyer’s guide and listed out the best brands that make jeep yj rear bumper with tire carrier which should help you make an informed purchase decision. There’s also a FAQ section which has answers to most common questions.

I hope that my post helps you find the right jeep yj rear bumper with tire carrier for your needs. Also, there could be a possibility that a new product arrives after I publish this post. For such cases, I’ll try to regularly update the article with new products.

Although, I’ve tried to explain everything I could, in case I’ve missed something or you’re unable to find the right jeep yj rear bumper with tire carrier for your needs or need any sort of buying advice. Feel free to contact me or comment down here.

Related Articles

FAQs

Which is the best jeep yj rear bumper with tire carrier?

According to my research, the EAG Classic Rear Bumper with Tire Carrier Black Textured Fit for 87-06 Jeep Wrangler TJ YJ is one of the best options. It’s quite popular among people looking for a reliable option.

Is EAG Classic Rear Bumper with Tire Carrier and Hitch Receiver Fit for 87-06 Wrangler TJ YJ as good as the EAG Classic Rear Bumper with Tire Carrier Black Textured Fit for 87-06 Jeep Wrangler TJ YJ?

Like said in the post, the best jeep yj rear bumper with tire carrier varies from person to person. If you’re looking for something that’s feature rich and highly-rated, consider going for the EAG Classic Rear Bumper with Tire Carrier Black Textured Fit for 87-06 Jeep Wrangler TJ YJ

Are there any reputable brands to consider when buying a jeep yj rear bumper with tire carrier?

According to me, there are a few popular brands that have a great online presence and provide ultimate customer service. They are: EAG, EAG.

What’s the average price a buyer spends when purchasing a jeep yj rear bumper with tire carrier?

According to a research I did, potential customers spend around 0 However, this is based on sales of both high-value options and low-value options.

Which is the most expensive jeep yj rear bumper with tire carrier in this list?

The EAG Classic Rear Bumper with Tire Carrier Black Textured Fit for 87-06 Jeep Wrangler TJ YJ is the most expensive option to consider. It’s because of the brand value, sophistication, and highly-responsive customer service.

Which is the cheapest jeep yj rear bumper with tire carrier and should I buy it?

Well, there’s no issue in buying the cheapest jeep yj rear bumper with tire carrier. However, make sure that it has all the features/specs you’ll need. Because like I said, there’s no point in spending money for a product that won’t do the job you bought it for. Makes sense?

Should I buy the most expensive jeep yj rear bumper with tire carrier?

Buying the most expensive jeep yj rear bumper with tire carrier doesn’t guarantee that is best for you. Before buying, make sure that it has all the essential features you’ll need. In some cases, even the most expensive option misses out the features you want the most.

Is EAG better than EAG?

To be honest, both the brands have their own set of advantages and disadvantages, before buying from either of them, make sure to do your research about them. Make sure that they have service centers near your place.

Rose Green

How difficult can it be to create simple and easy-to-read content? Nobody knew the answer to this question until Rose Green told the world the secret behind it. She rose to fame with her radically new approach to content writing whereby she threw the jargon out of the window. Everyone laughed at Rose because who thought a 26-year old woman could change the way content on technology is written!

Comments
There are no comments yet.
Got any query? or Comment?

Please put your query or comment in the below box. You email address will not be published.
Required fields are marked *

Your message is required.